Abu Faisal International Private Limited



Copper Cathode 99.99


About Copper Cathode

Copper is considered a ductile metal with a high thermal and electrical conductivity. Copper is used as a conductor for heat and electricity. Copper is also used as a building material and in the production of various metal alloys.

Copper cathode sheets are used in the production of high purity copper and copper alloy products. Individual cathode sheets are generally manufactured in the range of 0.5m2 to 1m2 and a thickness range of 3mm to 20mm. Copper cathode is considered the primary raw material in the production of copper rod for the cable and wire industry. Copper can also be found in the production of brass, copper tubes, and found in over 450 alloys. At Abu Faisal International Private Limited, we ensure that the copper cathodes are what you are looking for when investing in copper.

Diversification: The presence of the copper commodity in an equity-only portfolio can lower the volatility.

Safe Haven: In times of global economic uncertainty and market turbulence they can retain their value.

Inflation Hedging: Commodities intrinsic value is independent from currencies. They will often hold their value, even if a currency falls during a period of inflation.

Atomic Symbol: Cu Atomic Number: 29

Copper is a chemical element with the atomic symbol Cu and atomic number 29. Copper is located in Block D, Group 11, Period 4 with an atomic weight of 63.546. Of all pure metals, only silver elemental copper has a higher electrical conductivity.

Copper in its natural state is soft, malleable, and ductile metal with a high thermal and electrical conductivity. Copper that has been freshly exposed has a pinkish-orange color. Copper is one of the few metals that can occur in nature and be used in its metallic form.

Copper does not react with water, but it does reach with oxygen to form a layer of brown-black copper oxide. Unliked the rust that forms on iron, the brown-black copper oxide protects the underly metal from corrosion.

ELECTROLYTIC COPPER CATHODES

GRADE “A” MIN.CU -PURITY 99.99% – 99.97%

CHEMICAL COMPOSITIONS

Copper (Cu) 99.96% min-99.99% max
Other materials may be present which are described below:
Oxygen O2 Nil
Sulfur S 4 PPM
Iron Fe 2 PPM
Silver Ag 10 PPM
Lead Pb 0.2 PPM
Nickel Ni 0.2 PPM
Selenium Se 0.3 PPM
Antimony Sb 0.1 PPM
Silica Si 0.3 PPM
Cobalt Co 0.2 PPM
Arsenic As 0.1 PPM
Bismuth Bi 0.1 PPM
Manganese Mn 0.1 PPM
Tellurium Te 0.05 PPM
Aluminum Al 0.5 PPM
Magnesium Mg 0.4 PPM
Zinc Zn 0.4 PPM

QUANTITY

MOQ 300 MT

ORIGIN/LOADING PORT

Africa
Katanga Province, DR Congo/Dar Es Salaam Port, Tanzania

DIMENSION

Sheet with 914mm*914mm*12mm

WEIGHT OF EACH SHEET

125 kg (+/- 1%)

NET WEIGHT OF EACH PALLET

2MT (+/- 1%)

MINIMUM WEIGHT OF EACH CONTAINER

20 MT

GROSS WEIGHT OF EACH CONTAINER

22.20 MT Approximately

PACKAGE

In containers loaded with pallets fixed by aluminum bands

INSPECTION OF QUANTITY AND QUALITY OF GOODS

Inspection will be done via "SGS” inspection agency at Seller’s cost at port of loading. The unit of measurement in this contract is metric tons (MT). Weeks/Months are calendar weeks/months according to the Gregorian calendar. If Buyer request inspection at the port of discharge then these expenses will be for their account

PAYMENT TERMS

TOP 100 WORLD PRIME BANKS - 100% IRREVOCABLE , NON TRANSFERABLE , REVOLVING LETTER OF CREDIT FOR ONE MONTH SHIPMENT VALUE ,VALID FOR 366 DAYS AS COLLATERAL, ACTUAL PAYMENT BY MT103 /TT AFTER RE INSPECTION AT DESTINATION PORT BY SGS OR EQUIVALENT

PROCEDURES

1. The buyer sends a LOI to Abu Faisal International Private Limited
2. Seller sends the Draft SCO/FCO with the terms, conditions and procedures.
3. The buyer fine words and sends them to the seller! The seller validates the amendments and sends SCO/FCO amended! The buyer signs the SCO/FCO and sends to the seller along with ICPO with full banking information.
4. Buyer sends POF (Proof of Funds)
5. Seller issue Draft SPA to buyer and buyer will change some clause if required and signature and stamps and return to seller for sign.
6. The seller sends PI (Proforma Invoice) to the buyer.
7. The buyer lodge the contact (SPA) in his bank and sends LC Verbiage.
8. After approved by seller bank, buyer bank issues 100% irrevocable confirmed SBLC/DLC to seller bank for validation and execution.
9. After confirming receipt of the SBLC/DLC, the seller does load the product and validate the Q & Q by SGS or equivalent, expense by the seller. The seller sends the certificate SGS and all shipping document to the buyer indicating that the product is already on board.
7. Payment will be released against all documents, indicated in the contract and the As upper described SBLC and its condition.
8. When the first order is successful, the buyer sends a payment instrument renewable BUYER issues ICPO with full Bank information and other documents and upon acceptance issues the draft contract for the buyer to review and accept.

DOCUMENTS

1. COMMERCIAL INVOICE (Indicating the declaration that supplied copper has no connections with terrorist, terrorist organization, are not of Criminal origin and are free and clear of any and all liens or encumbrances.)
2. ORIG B/L INDICATING “FREIGHT PREPAID and FREIGHT ON BOARD”
3. CERTIFICATE OF QUALITY, QUANTITY ISSUED BY SGS / AT LOADING PORT
4. CERTIFICATE OF QUALITY, QUANTITY ISSUED BY SGS / AT DISCHARGE PORT
5. CERTIFICATE OFNON POLLUTION AND NON RADIATION
6. INSURANCE CERTIFICATE 110%
7. PACKING LIST
8. CERTIFICATE OF ORIGIN